Wheel upgrade for these JMI Carrying Case models:
(Celestron) CASENEX8S, CASENEX8D, CASENEX11; (JMI) CASERB66;
(Meade) CASELX8, CASELX208G, CASELX210G, CASELX212G, CASE55OTA.
Add large 10" all-terrain pneumatic wheels to your telescope carrying case to improve rough surface travel. Acquire with your original case purchase or at a later date. If the latter, four holes will need to be drilled.
To reduce case size, removal of the wheels from the bracket is quickly done by pulling two spring clip pins.
When installed, the wheels add 2" of depth, measuring from the bottom of the case (not including the small standard wheels), and 10-1/2" to 11-1/2" of length, measuring from the end of the case where the bracket is attached. If the wheels are removed from the bracket, the above dimensions can be reduced by approximately 4-1/2" each. Due to the contoured shape of the carrying cases, actual changes in the overall length of the case will be less and will depend on the model.