Water-Resistant pH Meter with Specific Food Industry pH Electrode.
The Hanna HI 99161N pH meter is widely used in the food industry where the pH of raw semisolid material is continuously checked to ensure that quality standards have been properly met. The pH of milk used for cheese manufacturing determines whether the cheese will be soft or hard. Certain pH values must likewise be strictly adhered to in the manufacturing of butter, yogurt and jelly products.
pH also determines the shelf life of foods. For example, by bringing the pH value below 4.5, growth and multiplication of pathogens such as clostridium botulinum are inhibited.
The HI 99161N's waterproof and non toxic casing provides excellent protection from water and humidity typically present in the food manufacturing environment. The meter utilizes the Hanna FC 202D pH electrode with built-in temperature sensor which is specially designed for use in food industries. The electrode has a rugged, easy to clean, Kynar® body that tapers to a strong conic tip ideal for measurements in semisolids such as meats and cheeses. It also has a free diffusion sleeve-type reference junction which prevents the typical problems of clogging in viscous liquids or samples with high solids content such as milk or condiments. The electrolyte used in the FC 202D electrode is free from the poisonous silver chloride, preventing food contamination. HI 99161N allows automatic calibration at either NIST or standard buffer sets with auto recognition and a stability indicator.
The temperature is continuously displayed on the secondary level of the large LCD. The meter runs on common 1.5 AA type batteries and the LCD provides a low battery warning signal.
HI 99161N pH Meter Applications...
-
Specific for Hazard Analysis Critical Control Point (HACCP) and food quality applications.
-
Ideal for wet and humid conditions.
-
Conic tip for use in semisolids such as meat and cheese.
HI 99161N pH Meter Includes...
- FC 202D pH electrode with Kynar® PVDF body.
- pH 4 and pH 7 buffer 20ml sachets.
- HI 700642 cleaning solution (2 x 20 ml).
- Batteries (4 x 1.5V AA) .
- Rugged carrying case.
- Instruction manual.
HI 99161N pH Meter Specifications...
Range: |
0.00 to 14.00 pH; 0.0 to 60.0°C.
0.0 to 60.0°C; 32.0 to 140.0°F . |
Resolution: |
0.01 pH; 0.1°C; 0.1°F. |
Accuracy: |
±0.01 pH; ±0.5°C; ±0.2°F (@20°C / 68°F). |
Calibration: |
Automatic, 1 or 2 points with two sets of memorized buffers
(pH 4.01 / 7.01 / 10.01 or 4.01 / 6.86 / 9.18). |
Temp. Compensation: |
Automatic, 0 to 60°C (32 to 140°F). |
pH Electrode: |
FC 202D combination, DIN connector, 1m (3.3ft.) cable (included). |
Battery Type / Life: |
4 x 1.5V AA; approx. 1000 hrs. continuous use.
Low battery signal. |
Environment: |
32 to 122°F (0 to 50°C); RH max 100%. |
Dimensions: |
5.9 x 3.1 x 1.1 inches (150 x 80 x 28 mm). |
Weight: |
7.5 oz. ( 210 g ). |
Warranty: |
Meter - 2 years; Probe - 6 months. |